high speed flexo printer slotter machine for corrugated carton box
1. Lead edge feeder:
a Suction feeder. Fan: 7.5 kw. Suction assisted paper feeding. The
air volume controlled by frequency and can be adjusted according to
the camber of the paperboard to keep feeding smoothly.
b four rows feeding wheels. Adopt Taiwan brand.
c Left and right baffle driven by screw rod electrical adjustment,
fast and easy operate.
d Up and down clearance of front baffle manually adjust
e Host adopt frequency control, start and running stable, save 30%
f There is interlock control clutch with die-cutting unit, to
realize sudden stop, stop feeding and recover feeding, and every
g Back baffle adjustment manually.
h Paper skip feeding device. (It can feed skipped or continuously).
Lift paper and drop paper adopt cylinder to promote movement.
i Feeding counter, which set and display the production quantity.
K dust clean device.
2. Separation and combination of the machine:
a Control of separation and combination of machine units is
electrically, with alarm to keep the safety of operating personnel.
b There is safe clutch on the transmission shaft, to avoid damage
to the machine when mis-operation(the host can not work when
c Pneumatic interlock device.
d Host motor start protect device.
3. Roller of feeding paper:
a Outer diameter of up roller : Φ155mm. Seamless steel, covered
with bearing rubber and treated with balance correction.
b Outer diameter of down roller: Φ155mm. Hard chrome-plated.
c Feeding roller clearance dial adopt bipolar self-locking worm
gear body adjusted manually. Use eccentric gear to adjust clearance, with
|Max feeding size||1450x2800mm||1200x2400mm|
|Min feeding size||380x750mm||380x750mm|
|Max printing size||1450x2600mm||1200x2200mm|
|Printing plate thickness||4mm||4mm|
plastic film for main parts, wooden case or carton box for small
parts, then loaded in 20' and 40' container, then fixed with
container.according to customer requirements. according to customer